Support

Procon®️Pumps

PROCON provides new pumps to manufacturers and end users for systems that require transferring clean liquids at pressures up to 250 psi and flows up to 11 gallons per minute. Procon Products manufactures six different styles of pumps with flow rates ranging from 15 to 660 gallons per hour. Available in brass or stainless steel configuration.

Procon rotary vane pumps are suitable for a variety of applications, including Carbonated water for soft drink dispensers, Espresso coffee machines, Beer cooling systems, cooling for TIG Welders, Reverse Osmosis systems, ultra-filtration systems, cooling circulation, constant temperature control, atomizing / misting systems, Automated pesticide misting systems, carwash machines, steam cleaning machines, cooling for X-Ray and medical lasers, water purification, boiler feeds, pressure booster pumps, and light hydraulic oils.

Series 1 - Carbonation

  • Brass
  • Integral Strainer
  • Relief Valve
  • 15 gph to 140 gph
  • 250 psi Discharge
  • Self Priming
  • Clamp On
  • Bolt On

Series 2 - Espresso / Welding

  • Brass
  • Without Integral Strainer
  • Relief Valve
  • 15 gph to 140 gph
  • 250 psi Discharge
  • Self Priming
  • Clamp On
  • Bolt On

Series 3 - Reverse Osmosis / Carbonation Circulation

  • Stainless Steel
  • Without Integral Strainer
  • Relief Valve
  • 15 gph to 140 gph
  • 250 psi Discharge
  • Self Priming
  • Clamp On
  • Bolt On

Series 4 - Reverse Osmosis / Cooling Circulation

  • Brass
  • Without Integral Strainer
  • Relief Valve
  • 115 gph to 330 gph
  • 250 psi Discharge
  • Self Priming
  • Clamp On
  • Bolt On

Series 5 - Reverse Osmosis / Cooling Circulation

  • Stainless Steel
  • Without Integral Strainer
  • Relief Valve
  • 115 gph to 330 gph
  • 250 psi Discharge
  • Self Priming
  • Clamp On
  • Bolt On

Series 6 - Reverse Osmosis

  • Stainless Steel
  • Without Integral Strainer
  • 300 gph to 660 gph
  • 250 psi Discharge
  • Requires Flooded Inlet
  • Bolt On Only
  • No Relief Valve

MAG DRIVE

  • No Mechanical Seal – Leak Free Design
  • Magnetically Coupled
  • Stainless Steel Construction

LGMagPRO AC

Features and Benefits
  • Canned Motor design for leak-free applications
  • Compact size ideal for applications requiring light weight and quiet operation <62 dBA)
  • Wet rotor for internal cooling and energy efficiency
  • Self priming (water) and maintenance free with low vibration and pulsation characteristics
  • Stainless steel housing works with acidity > 2 pH¹
General Application
  • Electric Vehicle (EV)
  • Charging Station
  • Heat Transfer
  • Cooling
  • Circulation
Technical Information
Pump housing & motor shaft 304 Stainless Steel Ports NPT 3/8″
Sealless PPS encapsulated permanent magnet (neodymium) motor rotor Unit Weight 9.6 lbs. (4.35 kg)
Elastomers EPDM Max Output Power 400 W
Bearing & Gear Carbon Fiber PEEK Protection Thermal Protection
Motor Information
Input Voltage Max. Speed Max. Input Current Thermal Protection Controller Speed Control Insulation Class [Max. Temperature]
SP5491MKY1PXXAIC 230 VAC 50/60 Hz 3400 RPM 3 Yes Built‑in 0–5 V B [-4 to 140°F (-20° to 60°C)]
SP5491MKY1PXXAKL 120 VAC 60 Hz 3400 RPM 7 Yes Built‑in 0–5 V B [-4 to 140°F (-20° to 60°C)]
Operating Range
Max Static Pressure 500 PSI (34 bar) Max Discharge Pressure 150 PSI (10 bar)
Fluid Temperature -4° to 175°F (-20° to 80°C) Wet Lift with Water 6 ft (2 M)
Max. Fluid Viscocity 20,000 cP [2] Max Operating Hours 20,000
Max. Sound Level 62 dBA

LGMagPRO DC

Features and Benefits
  • Canned Motor design for leak-free applications
  • Compact size ideal for applications requiring light weight and quiet operation (<62 dBA)
  • Wet rotor for internal cooling and energy efficiency
  • Self priming (water) and maintenance free with low vibration and pulsation characteristics
  • Stainless steel housing works with acidity > 2 pH¹
General Application
  • Electric Vehicle (EV) Charging Station
  • Heat Transfer
  • Cooling Circulation
Technical Information
Pump housing & motor shaft 304 Stainless Steel Ports NPT 3/8″
Sealless PPS encapsulated permanent magnet (neodymium) motor rotor Unit Weight 9.6 lbs. (4.35 kg)
Elastomers EPDM Max Output Power 400 W
Bearing & Gear Carbon Fiber PEEK Protection Thermal Protection
Motor Information
Input Voltage Max. Speed Max. Input Current Thermal Protection Controller Speed Control Insulation Class [Max. Temperature]
SP5491MKY1PXXAIY 24V DC 3000 RPM 25 Yes Built‑in 0–5 V B [-4 to 140°F (-20° to 60°C)]
SP5491MKY1PXXAKM 24V DC 3000 RPM 25 Yes External External F [-4 to 203°F (-20° to 95°C)]
SP5491MKY1PXXAKA (SP50017) 24V DC 1500 RPM 25 Yes Built‑in 0–5 V B [-4 to 140°F (-20° to 60°C)]
Operating Range
Max Static Pressure 500 PSI (34 bar) Max Discharge Pressure 150 PSI (10 bar)
Fluid Temperature -4° to 175°F (-20° to 80°C) Wet Lift with Water 6 ft (2 M)
Max. Fluid Viscocity 20,000 cP [2] Max Operating Hours 20,000
Max. Sound Level 62 dBA

cMagPRO 3

Features and Benefits
  • AC and DC motor with built-in controller for energy efficient operation
  • Canned Motor design for leak-free applications
  • Compact size ideal for applications requiring light weight and quiet operation (<62 dBA)
  • Wet rotor for internal cooling and energy efficiency
  • Self priming (water) and maintenance free with low vibration and pulsation characteristics
  • Stainless steel housing works with acidity > 2 pH¹
General Application
  • Electric Vehicle (EV) Charging Station
  • Heat Transfer
  • Cooling
  • Circulation
Technical Information
Pump housing and motor shaft 304 Stainless Steel
Sealless (optional) PPS encapsulated permanent magnet (neodymium) motor rotor
Elastomers Nitrile, Ethlyene Propylene (EPDM), Fluorocarbon, or Neoprene
Vane Material Carbon
Ports NPT 3/8"
Unit Weight 13 lbs. (6 kg)
Insulation Class B
Motor Information
Model No. Input Voltage Max. Output Power Max. Speed Max. Input Current Thermal Protection
SP303K100F11BB3DAIC 230V AC 400W 2200 RPM 3 Yes
SP303K100F11BB3DAIY 24V DC 400W 2200 RPM 25 Yes
Operating Range
Max Static Pressure 200 PSI (14 bar) Max Discharge Pressure 200 PSI (14 bar)
Fluid Temperature -4° to 140°F (-20° to 60°C) Speed 2,200 RPM
Max. Fluid Viscocity 100 cP [2] Wet Lift with Water 6 ft (2 M)
Max. Sound Level 62 dBA Max Operating Hours 20,000